High Quality Bottom Pond Cleaning Dredge Suction Pump – BAZ series Monoblock Centrifugal pumps – Beken

Product Detail

Product Tags

Feedback (2)

, , ,

High Quality Bottom Pond Cleaning Dredge Suction Pump – BAZ series Monoblock Centrifugal pumps – Beken Detail:

Temperature of water≤80℃, suction pressure≤1kg/cm2, working pressure is 1.6Mpa.
Temperature of water≤100℃, suction pressure≥2kg/cm2, working pressure is 1.6Mpa.
Temperature of water≤120℃, suction pressure≥4kg/cm2, working pressure is 1.6Mpa.

Application Std： Flange std can be BS,DIN,ISO,etc

INNOVATION:
•There are four wheels installed on the base plate to make sure the pump can be repaired quick and easily.
•If capacity is bigger than 400m3/h, the double volute is used to balance the radial force and increase the service time of the bearing(at least 2 times)
•The direction of suction/discharge can be on the top at the same time.
•The pump can be used to mixed cool and hot water, so Heat exchange plate is not necessary to use.

Remarks: We have been OEM for many brands from Europe and our pumps has been used by famous brands from T BAZ series is innovated monoblock pump used in HVAC area.

Constructure

baz-1

1	Base plate	2	Sliding wheels	3	Pin shaft	4	Support	5	Screw	6	Safty screw	7	Two end screws
8	Screw	9	Two end screws	10	Screw nut	11	Eletric motor	12	Water slinger	13	Mechanical seal	14	Bolts
15	Pump cover	16	Impeller	17	Pump casing	18	Key	19	Impeller nut	20	Nuts	21	Bolts

baz-2

1. Bolt	2. Cornical plug	3. Two end screws	4. Nut	5 impeller nut	6. Key	7. Pump casing
8. Impeller	9. Corrosion proof cover	10. Front static o-ring seat	11. Bolt	12. Connection pipe	13. Mechanical seal .	14. Casing cover
15. Rear o-ring seat	16. Bolt	17. Two end bolts.	18. Nut	19. Water slinger	20. Electric motor	21 bolt
22. Screw	23. Two end screw	24 safty plug	25. Support	26. Plug shaft	27. Wheels	28. Base plate.